Desilube 88 — NSF HX-1 Food-Grade EP/AW Lubricant Additive
Desilube 88 is an NSF HX-1 registered, LuSC-listed inorganic sulfur-phosphorus EP/AW lubricant additive for food-grade greases, metalworking fluids, industrial lubricants, and EAL formulations. The page includes visible ASTM D2596, D2266, D2782, and D3233 test data from the Desilube brochure.
Description
Desilube 88 — NSF HX-1 Food-Grade EP/AW Lubricant Additive
LuSC-listed inorganic sulfur-phosphorus technology for food-grade greases, metalworking fluids, industrial lubricants, and environmentally acceptable lubricant (EAL) formulations.
Desilube 88 is a proprietary inorganic sulfur-phosphorus extreme-pressure (EP), anti-wear (AW), and anti-friction (AF) lubricant additive for manufacturers formulating food-grade greases, metalworking fluids, industrial oils, and EAL lubricant systems.
Desilube 88 is NSF HX-1 registered and LuSC-listed, supporting lubricant manufacturers developing H1 food-grade lubricant formulations, EU Ecolabel-oriented formulations, and other environmentally responsible lubricant products.
Unlike dark solid lubricants, Desilube 88 is supplied as a white, free-flowing powder. It can be evaluated as an EP/AW additive, a white solid-lubricant alternative, or a performance booster with MoS2, graphite, hBN, and compatible additive packages.
Key Benefits of Desilube 88
- NSF HX-1 registered ingredient: Suitable for evaluation in food-grade lubricant formulations, subject to applicable registration limits and final-formulation review.
- LuSC-listed additive: Supports lubricant manufacturers developing EAL and EU Ecolabel-oriented formulations.
- Extreme-pressure and anti-wear support: Designed for high-load grease, oil, and metalworking applications.
- White powder form: Useful where black solid additives such as graphite or MoS2 are not preferred.
- Water-based formulation option: Can be evaluated in water-dilutable EP systems and metalworking fluid packages.
- Chlorinated paraffin alternative: Provides a non-chlorinated EP/AW chemistry option where application testing confirms suitability.
Typical Physical and Chemical Profile
| Property | Typical Value |
|---|---|
| Product form | White, free-flowing powder |
| Additive chemistry | Inorganic sulfur-phosphorus |
| Primary functions | Extreme pressure, anti-wear, anti-friction support |
| Food-grade registration | NSF HX-1 registered ingredient |
| Environmental listing | LuSC-listed additive ingredient |
| Typical treat range | 1-10% by weight; water-based systems may use lower active levels after dilution |
| Formulation types | Greases, industrial oils, metalworking fluids, EAL formulations, pastes, and additive concentrates |
Typical values are informational and are not contractual specifications. Confirm current registration, SDS, and product data before scale-up.
Visible ASTM Performance Data
Desilube 88 brochure data includes four-ball EP testing, four-ball wear scar measurements, Timken testing, and a water-based Falex test. The tables below make the test data visible to buyers and AI search systems instead of hiding it inside script-driven chart blocks.
Water-Based Falex EP Test
| Test / Formulation Detail | Result |
|---|---|
| Desilube 88 in water-based formulation | 2% Desilube 88 concentrate; dilution 1:20, giving 0.1% Desilube 88 active level; pH 7-8 |
| Falex EP, ASTM D3233, steel pin and AISI 1137 V-block | 3,750 lb |
| Wear after 15 minutes at 1,000 lb, pin weight loss | 3.1 mg |
Grease and Oil Performance Screening
| System | Desilube 88 Loading | 4-Ball Weld, ASTM D2596 | Load Wear Index | Wear Scar, ASTM D2266 | Timken OK Load, ASTM D2782 |
|---|---|---|---|---|---|
| Lithium grease baseline | 0% | 160 kgf | 18 | 0.80 mm | – |
| Lithium grease with MoS2 reference | 0% Desilube 88; 5% MoS2 | 250 kgf | 31 | 0.65 mm | – |
| Lithium grease with Desilube 88 | 1.5% | 400 kgf | 44 | 0.45 mm | – |
| Lithium grease with Desilube 88 | 2% | 620 kgf | 75 | 0.39 mm | 65 lb |
| Aluminum complex grease baseline | 0% | 120 kgf | – | 0.77 mm | – |
| Aluminum complex grease with Desilube 88 | 5% | 500 kgf | 51 | 0.55 mm | 45 lb |
| White mineral oil baseline | 0% | 100 kgf | – | 0.90 mm | – |
| White mineral oil with Desilube 88 | 5% | 500 kgf | 54 | 0.53 mm | – |
Performance figures are based on Desilube brochure test data under specific laboratory conditions. Actual results vary depending on application, operating conditions, base oil, thickener system, additive package, equipment, and treat rate. Test before scaling.
Recommended Applications
Food-Grade Greases and Lubricants
Desilube 88 can be evaluated in food-grade grease and lubricant formulations for bearings, gears, chains, packaging lines, bottling equipment, and other high-load food processing applications where NSF HX-1 additive ingredients are required.
Environmentally Acceptable Lubricants and EAL Formulations
As a LuSC-listed additive ingredient, Desilube 88 can support EAL formulation development. Final lubricant compliance depends on the full finished formulation and the applicable environmental criteria.
Metalworking Fluids
Desilube 88 can be evaluated in water-based and oil-based metalworking fluids for cutting, forming, rolling, drawing, and severe boundary-lubrication applications.
Industrial Greases and Specialty Lubricants
Desilube 88 can be used in lithium, aluminum complex, mineral-oil, and specialty grease systems where white EP/AW chemistry is preferred over black solid lubricants or chlorinated EP chemistry.
Formulation Compatibility and Recommended Dosage
Typical Desilube 88 treat rates are 1-10% by weight depending on formulation type, base chemistry, operating conditions, required EP/AW performance, and compatibility with the complete additive package.
For water-based systems, Desilube 88 can be evaluated in concentrates and diluted systems; brochure data includes a 2% concentrate diluted 1:20 to 0.1% active Desilube 88 at pH 7-8.
Desilube provides laboratory testing, additive compatibility evaluation, and formulation support to help manufacturers select treat rate and validate application-specific performance.
Frequently Asked Questions
Is Desilube 88 NSF H1 certified?
Desilube 88 is NSF HX-1 registered as a lubricant additive ingredient. HX-1 registration is different from NSF H1 registration of a finished lubricant.
Is Desilube 88 LuSC listed?
Yes. Desilube 88 is LuSC-listed as an additive ingredient and can support lubricant manufacturers developing EAL or EU Ecolabel-oriented formulations.
Can Desilube 88 be used in water-based metalworking fluids?
Yes, Desilube 88 can be evaluated in water-based formulation systems. Compatibility, stability, pH, corrosion protection, and final performance should be confirmed in the complete formulation.
Can Desilube 88 replace MoS2, graphite, or chlorinated paraffins?
Desilube 88 provides a white inorganic EP/AW chemistry option for selected formulations. Replacement suitability must be confirmed through application-specific testing because each lubricant system has different base oils, thickeners, co-additives, and operating conditions.
Request a Sample or Technical Consultation
Looking for an NSF HX-1 registered and LuSC-listed EP/AW additive with visible ASTM test data?
Contact Desilube to request technical documentation, discuss formulation requirements, or arrange product evaluation.
Related Products
Desilube AEP is a lignin-based extreme-pressure and anti-wear additive powder for lubricant and grease manufacturers developing selected industrial grease and environmentally conscious lubricant formulations.
An eco-friendly, high-performance anti-wear, anti-friction, extreme pressure lubricant additive. Desilube 99FEL is HX-1 certified by NSF International for food-grade lubricants and is registered on the LuSC list, making it Ecolabel ready. It is highly effective at low treat rates (0.5%-3%) and serves as a synergistic extender for MoS₂.
Effective concentration range: 1%–4% by weight
Desilube 77 — amine phosphate EP/AW additive, oil-soluble, replaces chlorinated paraffins in heavy-duty metalworking and grease formulations.
Powerful Viscosity & Suspension Control for Oil & Synthetic-Based Drilling Systems
Desilube 98F is an NSF HX-1 registered, LuSC-listed inorganic sulfur-phosphorus EP/AW lubricant additive for food-grade greases, industrial lubricants, metalworking fluids, and EAL formulations. Supplied as a white, free-flowing powder.
Desiclay G3 is an organoclay rheology additive for grease and lubricant formulations. Builds viscosity in oil-based and synthetic systems, suspends solid additives like MoS₂ and graphite, and replaces Bentone-class organoclays at competitive cost.